English
Textured Non Slip Molded Integral Skin Foam Armrest Assembly
Featuring functional surface grooves for enhanced tactile grip and breathability, this molded integral skin foam pad provides superior non-slip support. The monolithic single-piece molding technology eliminates fabric peeling and raw foam exposure, ensuring liquids and dirt cannot penetrate the core. Built for quick installation on commercial seating, it absorbs cabin shock while maintaining a refined aesthetic.
-
Outer Integral Skin Foam Layer
Density 450 to 600 kg/m3, Shore A 65 to 80; Wear-resistant, scratch-proof, pressure-resistant, and non-peeling.
Internal Foam Core Layer
Density 180 to 240 kg/m3, Shore A 35 to 45; Soft, supportive, and ergonomic arm cushioning.
Overall Assembly Average Density
200 to 280 kg/m3; Semi-rigid feel balancing structural strength with tactile comfort.
Abrasion Resistance
Withstands 5000 cycles of steel wool reciprocating friction without base exposure or cracking.
Compression Permanent Set
5% or lower (Tested at 50 degrees C under constant pressure for 22 hours); Resists permanent sagging.
Tear Strength
3.5 N/mm or higher; Prevents edge tearing during flexing, installation, or torque locking.
Resilience Rate
48% or higher; Rapid spring-back recovery after arm release with zero indentations.
Flammability Rating
GB 8410-2017 and FMVSS 302 automotive interior flammability compliant.
Odor & VOC Level
Grade 3 or lower low-VOC odor rating, meeting passenger vehicle eco-standards.
Operating Temperature
-40 to 90 degrees C; Non-sticky under summer sun exposure and non-brittle in extreme winter cold.
Humid-Heat Resistance
Passes 500 hours cycle testing at 70 degrees C and 95% RH without cracking, discoloration, or mold growth.
Stain Resistance & Cleaning
Dense, non-porous skin surface prevents liquid penetration and wipes clean easily with wet towels.
-
Structural Layering
- Enhanced Anti-Slip Texture: Surface grooves increase grip and thermal comfort, preventing arm slippage during vehicle operation.
- Monolithic Sealed Core: One-piece molded design completely seals the inner foam layer against water, sweat, and chemicals.
- Vibration & Shock Absorption: High-elasticity core dampens mechanical chatter, lowering operator fatigue over long work hours.
- Manufacturer Advantage: Custom texture embossing, private logo branding, and rapid prototyping capabilities for brand differentiation.
